Sequence valve

Sequence valve
Instructions for use:
Sequence valves are used to feed 2 cylinders in sequence, supplying fluid to the secondary circuit with free return when the primary circuit function has completed the pressure setting. Ideal for low pressure lines of secondary brakes when pressure increases.
Application:
Installation instructions as shown, using 2 actuators.
Depending on the application, please note that the flow can freely change from C to V, but when the valve reaches the set pressure, the flow will change from V to C
Specification | 3/8” | 3/8” |
Maximum Flow Rate(L/min) | 35 | 35 |
Spring | Setting Range(Bar) | 10-50* | 20-100 | 10-180 Standard | 50-250 | 80-300 |
Pressure Increase (Bar/turn)Q=4L/min | 7 | 12 | 30 | 45 | 50 | |
Standard Setting(Bar) | 30 | 75 | 90 | 130 | 150 |



Model | V/C | L | L1 | L2 | L3 | L4 | L5 | D | H | S |
HYVSQAPP 3/8” | G3/8” | 74 | 149 | 55 | 12 | 39 | 56 | 8.5 | 70 | 30 |
HYVSQAPP 1/2” | G 1/2” | 80 | 155 | 55 | 18 | 37 | 55 | 8.5 | 70 | 30 |