Double hydraulic control check valve (flange type)
Double hydraulic control check valve (flange type)
Instructions for use:
Pilot-operated check valves are used to block hydraulic cylinders in both directions, fluid flows in one direction, and blocks fluid in the reverse direction until the pressure acting end face is mounted to enable direct assembly to the cylinder.
Application:
Connect V1 and V2 to pressure flow, and connect C1 and C2 to the actuator through flanges.
Specifications | HYVBPDE3/8”FL | HYVBPDE1/2”FL |
Pilot ratio | 1：5.5 | 1：4.5 |
Maximum flow（L/min） | 30 | 55 |
Maximum pressure（Bar） | 350 | |
Opening pressure（Bar） | 4.5 | 3 |
