Flanged dual pump high and low flow unloading valve
Flanged dual pump high and low flow unloading valve (6-diameter, 10-diameter and 16-diameter valve body)
Method of use and operation:
When the pressure reaches the set value, this valve can be used in the circuit of a double-position pump to release the excess oil of the high-flow pump to the tank. From this moment on, energy is saved when operating at high pressure with the low-flow pump on the actuator. Theoretically, it is flange mounted directly on the solenoid valve.
Application:
Fix the hydraulic valve to the pressure flow, connect BP to the high-flow pump, AP to the low-flow pump, T port to the tank and M to the final pressure gauge. Fix the flange on the solenoid valve, connect to VABP and connect ports A and B to the actuator.
Specifications | FL6 | FL10 | FL16 | |
Maximum flow （L/min） | AP | 15 | 25 | 35 |
BP | 30 | 45 | 80 | |
T | 40 | 65 | 100 | |
Maximum pressure（Bar） | 350 | |||
Standard | AP | 20-80 | ||
Spring | BP | 50-350 | ||
Model | A | B | T | AP | BP |
HYVABP FL 6 | G 1/2” | G 1/2” | G 1/2” | G 1/4” | G3/8” |
HYVABP FL 10 | G 3/4” | G 3/4” | G 3/4” | G3/8” | G 1/2” |
HYVABP FL 16 | G 1” | G 1” | G 1” | G 1/2” | G 3/4” |