Travel blocking valve (normally open)
.jpg)
Travel blocking valve (normally open)
Usage:
This valve is used to block the oil inlet in the hydraulic circuit, or to end the cylinder stroke (normally open type). Push and pull the sliding rod to close the valve to quickly stop the flow of the medium.
Application:
The P chamber is connected to the valve, and the A port is connected to the circuit or cylinder. When the sliding rod is operated, the flow from the P chamber to the A chamber is cut off, and the one-way valve can make the medium flow in the reverse direction (i.e. A→P)
Specifications | 60 | 80 | 120 |
Maximum flow(L/min) | 60 | 80 | 120 |
Maximum pressure(Bar) | 350 |
1-1024x399.jpg)
2-1024x588.jpg)
3-1-887x1024.jpg)
Model | A/P | L | L1 | L2 | L3 | L4 | L5 | L6 | D | D1 | H | H1 |
HYV-FCR IT 60 | G 3/8” | 69 | 130 | 66 | 45 | 45 | 86 | 103 | 8.5 | 6.5 | 26 | 68 |
HYV-FCR IT 80 | G 1/2” | 69 | 130 | 66 | 45 | 45 | 86 | 103 | 8.5 | 6.5 | 26 | 68 |
HYV-FCR IT 120 | G 3/4” | 88 | 173 | 50 | 56 | 46 | 23.5 | 92 | 8.5 | 13 | 27.5 | 50 |